The Ballistix line is specifically built for performance enthusiasts who want to push the performance envelope without worrying about data loss or corruption, mysterious intermittent errors and display problems, or worse — the dreaded BSOD! The Ballistix line of high-performance memory modules features advanced speed grades, low latencies, and integrated aluminum heat spreaders.

For more information about the Ballistix memory line, please visit the Ballistix section of our Web site.

• Part Number: BL2KIT6464Z505
• Module Size: 1GB kit (512MBx2)
• Package: Ballistix 184-pin DIMM
• Spec: PC4000
• Configuration: 64Meg x 64
• DIMM Type: UNBUFFERED
• Error Checking: NON-ECC
• Speed: DDR500
• Voltage: 2.8V
• Memory Timings: 2.5-4-4-8

What is a Ballistix 184-pin DIMM?

A Ballistix dual inline memory module (DIMM) consists of a number of memory components that are attached to a black printed circuit board. The gold pins on the bottom of the DIMM provide a connection between the module and a socket on a larger printed circuit board. The pins on the front and back of a DIMM are not connected to each other.

Ballistix 184-pin DIMMs are used to provide DDR1 SDRAM memory for desktop computers. Ballistix 184-pin DIMMs are available in PC3200 DDR (DDR400) SDRAM and PC4000 DDR (DDR500) SDRAM.

To use DDR memory, your system motherboard must have 184-pin DIMM slots and a DDR-enabled chipset. A DDR SDRAM DIMM will not fit into a standard SDRAM DIMM socket. (Information about which memory technology your system uses is included in the Crucial Memory Advisor™ tool.)

The number of black components on a Ballistix 184-pin DIMM can vary, but it always has 92 pins on the front and 92 pins on the back, for a total of 184. Ballistix 184-pin DIMMs are approximately 5.25 inches long and 1.25 inches high, though the heights can vary. While 184-pin DIMMs and 168-pin DIMMs are approximately the same size, 184-pin DIMMs have only one notch within the row of pins.