|
CPU
|
-
Support for an Intel® Core™ 2 Extreme processor/ Intel® Core™ 2 Quad processor/Intel® Core™ 2 Duo processor/ Intel® Pentium® processor Extreme Edition/Intel® Pentium® D processor/ Intel® Pentium® 4 processor Extreme Edition/Intel® Pentium® 4 processor/ Intel® Celeron® processor in the LGA 775 package
(Go to GIGABYTE's website for the latest CPU support list.)
-
L2 cache varies with CPU
-
1600 (O.C.)/1333/1066/800 MHz FSB
|
|
Chipset
|
-
North Bridge: Intel® P35 Chipset
-
South Bridge: Intel® ICH9R
|
|
Memory
|
-
4 x 1.8V DDR2 DIMM sockets supporting up to 8 GB of system memory
-
Dual channel memory architecture
-
Support for DDR2 1200 (O.C.)/1066/800/667 MHz memory modules
Please refer "Memory Support List" for memory support information.
|
|
Audio
|
-
Realtek ALC889A codec
-
High Definition Audio
-
2/4/5.1/7.1-channel
-
Support for DTS (dts NEO:PC)
-
Support for S/PDIF In/Out
-
Support for CD In
|
|
LAN
|
-
Realtek 8111B chip (10/100/1000 Mbit)
|
|
Expansion Slots
|
-
2 x PCI Express x16 slots (The PCIE_16_1 slot supports x16; the PCIE_16_2 supports x4.)
-
3 x PCI Express x1 slots (share with the PCIE_16_2 slot)
-
2 x PCI slots
|
|
Form Factor
|
-
ATX (305 x 244mm)
|
|
Storage Interface
|
South Bridge:
-
6 x SATA 3Gb/s connectors (SATAII0, SATAII1, SATAII2, SATAII3, SATAII4, SATAII5) supporting up to 6 SATA 3Gb/s devices
-
Support for SATA RAID 0, RAID 1, RAID 5, and RAID 10
GIGABYTE SATA2 chip:
-
1 x IDE connector supporting ATA-133/100/66/33 and up to 2 IDE devices
-
2 x SATA 3Gb/s connectors (GSATAII0, GSATAII1) supporting up to 2 SATA 3Gb/s devices
-
Support for SATA RAID 0, RAID 1, and JBOD
iTE IT8718 chip:
-
1 x floppy disk drive connector supporting up to 1 floppy disk drive
|
|
IEEE 1394
|
-
T.I. TSB43AB23 chip
-
Up to 3 IEEE 1394a ports (2 on the back panel, 1 via the IEEE 1394 bracket connected to the internal IEEE 1394 header)
|
|
USB
|
-
Integrated in the South Bridge
-
Up to 12 USB 2.0/1.1 ports (8 on the back panel, 4 via the USB brackets connected to the internal USB headers)
|
|
Internal I/O Connectors
|
-
1 x 24-pin ATX main power connector
-
1 x 8-pin ATX 12V power connector
-
1 x 4-pin PCIe 12V power connector
-
1 x floppy disk drive connector
-
1 x IDE connector
-
8 x SATA 3Gb/s connectors
-
1 x CPU fan header
-
2 x system fan headers
-
1 x power fan header
-
1 x North Bridge fan header
-
1 x front panel header
-
1 x front panel audio header
-
1 x CD In connector
-
1 x S/PDIF In header
-
1 x S/PDIF Out header
-
2 x USB 2.0/1.1 headers
-
1 x IEEE 1394a header
-
1 x parallel port header
-
1 x serial port header
-
1 x power LED header
-
1 x chassis intrusion header
|
|
Back Panel Connectors
|
-
1 x PS/2 keyboard port
-
1 x PS/2 mouse port
-
1 x coaxial S/PDIF Out connector
-
1 x optical S/PDIF Out connector
-
8 x USB 2.0/1.1 ports
-
2 x IEEE 1394a ports
-
1 x RJ-45 port
-
6 x audio jacks (Center/Subwoofer Speaker Out/Rear Speaker Out/Side Speaker Out/Line In/Line Out/Microphone)
|
|
I/O Controller
|
-
iTE IT8718 chip
|
|
H/W Monitoring
|
-
System voltage detection
-
CPU/System temperature detection
-
CPU/System/Power fan speed detection
-
CPU overheating warning
-
CPU/System/Power fan fail warning
-
CPU fan speed control
|
|
BIOS
|
-
Supports DualBIOS Plus
-
2 x 8 Mbit flash ROM
-
Use of licensed AWARD BIOS
-
PnP 1.0a, DMI 2.0, SM BIOS 2.3, ACPI 1.0b.
|
|
Unique Features
|
-
Support for @BIOS
-
Support for Download Center
-
Support for Q-Flash
-
Support for EasyTune
-
Support for Xpress Install
-
Support for Xpress Recovery2
|
|
Overclocking
|
Voltage adjustments in BIOS Setup (CPU/DDR2/PCIe/FSB/(G)MCH) Allow you to:
-
Increase CPU voltage
-
Increase DDR2 voltage by 0.05V to 1.55V with 0.05V increment
-
Increase PCIe voltage by 0.05V to 0.35V with 0.05V increment
-
Increase FSB voltage by 0.05V to 0.35V with 0.05V increment
-
Increase (G)MCH voltage by 0.025V to 0.375V with 0.025V increment
Frequency adjustments in BIOS Setup (CPU/DDR2/PCIe) allow you to:
-
Adjust CPU host frequency from 100 MHz to 700 MHz with 1 MHz increment
-
Adjust DDR2 frequency
-
Adjust PCI Express x16 frequency from 90 MHz to 150 MHz with 1 MHz increment
|
|
Remark
|
-
Due to different Linux support condition provided by chipset vendors, please download Linux driver from chipset vendors' website or 3rd party website.
-
Due to most hardware/software vendors no longer offer support for Win9X/ME. If some vendors still has Win9X/ME drivers available, we will publish on website.
-
Duo to chipset limitation, Intel ICH9R RAID driver does not support Windows 2000 operating system.
|