|
Perfectly balanced high Power with all detail connectors to fulfil every customer need, NRP-HC Series supports ATX 12V Vers. 2.2, EPS 12V Vers. 2.92, QUAD SLI Systems and AMD/INTEL QUAD CORE Platforms.
Outstanding Performance (over 87% Efficiency), covering all features, cable management and nice outlook design match perfectly to PC Enthusiasts imaginations.
With 140mm powerful but silent fan protecting from Overheating, easy to install and absolutely user-friendly, NRP-HC Series will run your PC stable and save cost by high efficiency and less power consumption.
Multiple +12V Output
Enhanced +12V current capability broadens utilization possibilities.
High Efficiency (up to 80%)
Optimal solution for lower energy consumption, noise, and heat.
Active Power Factor Correction (0.99 PFC)
Reduce line loss & power distortion.
Double Forward Circuit Design
Increase the reliability and efficiency of power.
Universal AC Input(Full Range)
Plug & run safely anywhere in the world.
Smart and Silent Fan Control
Smart thermal control to balance noise and cooling.
13.5(14)cm Cooling Fan
Maximum airflow, minimum noise level and extra durable life.
PCI-Express Connector
Support new PCI-E connectors for Video Card.
Patented Easy Swap Connector
Unplug connectors easily & quickly.
Cable Management Swap Connector
Improve messy cable problem.
With cable management swap connector.
PC Power Supply Design Guide
Support ATX / BTX / EPS.
Multiple Platforms
Capability for Intel / AMD platforms.
Output Protection
Completed protection OVP / OCP / OPP / UVP / SCP / OTP.
Mesh Sleeve Cable Design
Make cable management easier & airflow efficient.
Honey Comb Structure
Japan Electric Capacity
Technical Specifications
|
Product Name
|
NRP-HC1001 |
|
Product Number
|
CPP-1000U-CO1 |
|
Power
|
1000W |
|
Dimension
|
200mm(L) x 150mm(W) x 86mm(H) |
|
Switches
|
ATX Logic on-off additional power rocker switch |
|
Power Factor
|
Active PFC (PF > 0.9) |
|
Cooling System
|
140mm Fan, 2300RPM±10% |
|
Noise
|
16 dBA at 1300RPM |
|
P.G. Signal
|
100-500 ms |
|
Efficiency
|
Up to 87% |
|
Hold-up Time
|
16 ms |
|
INPUT
|
|
Input Voltage
|
100-240VAC |
|
Input Frequency Range
|
50~60Hz |
|
MTBF
|
120,000 hrs minimum (at 25℃) |
|
Input Current
|
13A |
|
OUTPUT
|
| |
Max/Min |
Regulation *1 |
Ripple & Noise *2 |
Output |
|
+12V1
|
20A/1A |
+3, -3% |
120mV |
500W |
|
+12V4
|
36A/1A |
+3, -3% |
120mV |
|
+3.3V
|
30A/0.5A |
+3, -3% |
50mV |
500W |
|
+12V2
|
20A/1A |
+3, -3% |
120mV |
|
+12V3
|
36A/1A |
+3, -3% |
120mV |
|
+5V
|
30A/0.5A |
+3, -3% |
50mV |
|
-12V
|
0.8A/0A |
+10, -10% |
120mV |
9.6W |
|
+5Vsb
|
3.5A/0A |
+3, -5% |
50mV |
17.5W |
|
Total Power
|
1000W |
|
Peak Power
|
1100W |
|
 +5Vsb operate at 3.5A max load base on PS-ON mode.
If PS-OFF +5Vsb only operate at 3A max load.
Add 0.1µF capacitors across output terminal during ripple & noise test.
|
|
Environment
|
|
Operating Temp.
|
10℃ to 50℃ |
|
Storage Temp.
|
-20℃ to 70℃ |
|
Operating Humidity
|
20% to 90%, non-condensing |
|
Storage Humidity
|
5% to 95%, non-condensing |
|
Protection
|
| DC Rail |
Trigger Point/Range |
|
Over Voltage Protection
|
+3.3V trip point |
4.5 Vmax |
| +5.0V trip point |
7.0 Vmax |
| +12.0V trip point |
15.6 Vmax |
|
Over Current Protection
|
+3.3V |
33A ~ 50A |
| +5.0V |
33A ~ 50A |
| +12V1 & +12V2 |
22A ~ 35A |
| +12V3 & +12V4 |
42A ~ 60A |
|
Under Voltage Protection
|
+3.3V trip point |
2.0 Vmin |
| +5.0V trip point |
3.3 Vmin |
| +12.0V trip point |
8.5 Vmin |
|
Short Protection
|
All output to GND |
|
|
|
Morre information can be found on Xigmatek's Website
|
